Saturday, September 3, 2016
How to Update Rooted OnePlus 3 to Oxygen OS 3 1 3 Firmware Camera HDR Performance Tuning
How to Update Rooted OnePlus 3 to Oxygen OS 3 1 3 Firmware Camera HDR Performance Tuning
OnePlus has started rolling out Official OnePlus 3 Oxygen OS 3.1.3 Firmware Update.This OTA Update comes with loads of bug fixes and stability improvement.The Update is available via OTA (Over-the-air).You can manually check for the update.We highly recommend upgrading your device to this firmware.
÷ NEW FEATURES IN OXYGEN OS 3.1.3:
•Camera HDR performance tuning
•Bluetooth and NFC connectivity improvements
•Bug fixes in general telephony
•Bug fixes in Google and OnePlus apps
More Info via OnePlus Forum .
View my Flipboard Magazine.
÷ Prerequisites:
•This tutorial is only for installing Oxygen OS 3.1.3 Firmware on Rooted OnePlus 3. Please do not try on any other One Plus variants.
•Your phone should be rooted and haveClockworkMod recovery installed from before.
•This tutorial will wipe out all your data.Proceed at your own risk.Perform a Dalvik Cache wipe before proceeding from the recovery mode.
•Make sure you backup all your data in your phone before proceeding.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to: Update Rooted OnePlus 3 to Oxygen OS 3.1.3 Firmware [ Camera HDR Performance Tuning].
Step 1 – Download Oxygen OS 3.1.3 Firmware for your OnePlus 3 to your computer.
Step 2 – Connect and mount your OnePlus 3 USB memory on your computer using the USB cable.
Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip file and Google Appszip files to your SD card. Make sure the files are in the SD card root (not in any folder).
Step 4 – Then turn OFF your phone and disconnect from the USB cable.
Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together
Step 6 – Once you are in ClockworkModRecovery, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.
Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .
Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.
Your OnePlus 3 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it Your OnePlus 3 should now have Oxygen OS 3.1.3 Firmware installed on your phone! Go to Settings > About phone to verify.
For More One Plus3 Brand New Firmware & Custom ROM keep checking AndroidCustomROM Fix ™®
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More latest custom ROM fix.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
÷ Prerequisites:
•This tutorial is only for installing Oxygen OS 3.1.3 Firmware on Rooted OnePlus 3. Please do not try on any other One Plus variants.
•Your phone should be rooted and haveClockworkMod recovery installed from before.
•This tutorial will wipe out all your data.Proceed at your own risk.Perform a Dalvik Cache wipe before proceeding from the recovery mode.
•Make sure you backup all your data in your phone before proceeding.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to: Update Rooted OnePlus 3 to Oxygen OS 3.1.3 Firmware [ Camera HDR Performance Tuning].
Step 1 – Download Oxygen OS 3.1.3 Firmware for your OnePlus 3 to your computer.
Step 2 – Connect and mount your OnePlus 3 USB memory on your computer using the USB cable.
Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip file and Google Appszip files to your SD card. Make sure the files are in the SD card root (not in any folder).
Step 4 – Then turn OFF your phone and disconnect from the USB cable.
Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together
Step 6 – Once you are in ClockworkModRecovery, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.
Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .
Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.
Your OnePlus 3 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it Your OnePlus 3 should now have Oxygen OS 3.1.3 Firmware installed on your phone! Go to Settings > About phone to verify.
For More One Plus3 Brand New Firmware & Custom ROM keep checking AndroidCustomROM Fix ™®
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More latest custom ROM fix.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
Available link for download
