Sunday, November 20, 2016

How to Update Nexus 6P to Android N Developer Preview 5 NPD90G Factory Image

How to Update Nexus 6P to Android N Developer Preview 5 NPD90G Factory Image









Android N Developer Preview 5 is now available for the Nexus 5X, Nexus 6P, Nexus 6, and Nexus 9 phones and tablets. These are the major changes in Developer Preview 5 release of Android N, as per Google:



As we close in on the public rollout of Android 7.0 Nougat to devices later this summer, today we’re releasing Developer Preview 5, the last milestone of this preview series. Last month’s Developer Preview included the final APIs for Nougat; this preview gives developers the near-final system updates for all of the supported preview devices, helping you get your app ready for consumers.

View my Flipboard Magazine.


 ÷ Prerequisites:

•This tutorial is only for Huawei Nexus 6P and we are not sure if it will work on the other variants of the Nexus 6P on other carriers.

•Your phone can be on any previous Android version or  even on a custom ROM. It doesn’t matter at all. This tutorial will still work for installing Android N Developer Preview 5.



*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.


* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.


÷ How to Update Nexus 6P to Android N Developer Preview 5 NPD90G Factory Image


Step 1 – Download Android N Factory Image (angler-npd90g-factory-cd9ac81e.tgz) for Nexus 6P on your PC, if you haven’t already.

Step 2 – Connect your Nexus 6P to your computer using the USB cable.

Step 3 – Please make sure Fastboot is configured and properly installed on your computer.


Step 4 – Turn OFF your phone.

Step 5 – Get into the Fastboot/Bootloader Mode on your phone. Turn ON the phone while pressing and holding the Volume Up + Volume Down + Power buttons till you see the Fastboot menu and START on top.

Step 6 – Now extract the downloaded file anywhere in your computer. Go to the folder angler-NPD90G and then copy/paste all the files to your Fastboot directory.


Step 7 – From the factory image files in your Fastboot directory, do the following depending which OS you are on:

On Windows: Run the file “flash-all.bat”.
On Mac: Run the file “flash-all.sh” using Terminal.
On Linux: Run the file “flash-all.sh”.


Step 8 – That’s pretty much that you had to do for flashing the stock factory image on your Nexus 6P. Now wait and watch as the process is completed — or follow the on-screen instructions on your phone if in case you have to unlock the bootloader.

Step 9 – After the installation completes, the phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait with patience!

That’s it! Your Nexus 6P should now have the official Android N NPD90G Developer Preview 5 software update installed on your phone using the stock factory image from Google! Go to Settings >About phone to verify.



For More Nexus 6P Updates Keep Checking Android Custom ROM Fix ™®

That’s all. We hope this guide serves you well. If there’s anything you’d like to be added/changed on this page, PLZ Use the comment box below to contribute more ideas & Suggestions .

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

Want the latest Updates Sign up for our newsletters!

PLZ Follow Us On Flipboard 4 More Latest Updates.

Best Regards.™

Available link for download